Mastering Plated Through-Hole Via Inspection Using X-ray Technology

In today’s fast-paced electronics industry, understanding through-hole vias (or barrels) is crucial. Despite predictions of their decline, these components remain vital for ensuring strong mechanical connections. PCB through-hole plating continues to be widely used, especially where connector strength is essential. This post explains how to inspect plated through-hole vias using X-ray technology, a key tool for identifying issues that optical inspection often misses.

Why Plated Through-Hole Via Inspection Matters for PCBs

As surface-mount technology (SMT) became dominant, many thought through-hole vias would disappear. However, their unmatched mechanical strength keeps them relevant. In applications requiring secure connections, such as for cables and connectors, a through-hole via provides the durability surface-mount options can’t offer. The strength they provide ensures that connectors stay firmly attached to the board, preventing them from being pulled loose over time.

The Importance of X-ray Inspection

The strength of PCB through-hole plating makes it essential to inspect these components for defects. Optical inspections alone can’t reveal all potential problems. While a through-hole via might look perfect on the surface, it could lack the solder fill necessary for reliable connections. This is where X-ray technology comes into play.

With X-ray inspection, manufacturers can look beyond the surface to assess the solder fill inside the plated through-hole via. This detailed view ensures that the solder adequately fills the barrel, making the connection both mechanically and electrically sound. Without X-ray inspection, incomplete fills could go unnoticed, leading to potential failures down the line.

How to Perform Plated Through-Hole Via Inspection with X-rays

Start the inspection by placing the board in the X-ray system, which has a vertically aligned X-ray source and sensor. This setup provides a clear view of the solder fill inside the through-hole via. By adjusting the angle and tilt of the board, inspectors can thoroughly examine the solder fill.

Take a four-pin through-hole connector as an example. At first glance, an optical inspection might show a shiny, well-soldered top, suggesting a solid connection. However, X-ray imaging often reveals a different story. In one case, the solder filled only about 75% of the plated through-hole via. In another, the solder barely reached the bottom of the board. Without X-ray inspection, these critical defects would remain hidden.

In a proper inspection, a through-hole via should be filled as close to 100% as possible. Full barrel fills ensure strong connections that last. Less than 50% fill creates too much movement in the via, which can lead to broken connections.

Risks of Incomplete Barrel Fills

X-ray inspections often uncover incomplete solder fills, a major cause of component failure. When the solder fill is too low, the pin doesn’t have enough support inside the via. This allows the pin to move over time, which eventually leads to broken mechanical and electrical connections.

In high-stress environments, such as those with heavy vibration or mechanical strain, a poorly filled through-hole via may fail early. This makes X-ray inspection a critical step in the manufacturing process. Manufacturers must ensure that every plated through-hole via meets industry standards and provides lasting reliability.

Understanding IPC Standards for Barrel Fill

Barrel fill requirements vary depending on the class of the product being manufactured. The IPC (Institute for Printed Circuits) outlines acceptable fill percentages for different product classes. For instance, a Class 1 product used in general electronics may not require the same high standards as a Class 3 product, which is designed for critical applications like aerospace or medical devices.

Manufacturers should regularly consult IPC guidelines to ensure compliance. Doing so guarantees that their products meet the necessary quality standards for their intended use.

Common Defects Found in Plated Through-Hole Via Inspections

X-ray inspection clearly shows the difference between a well-filled and poorly filled through-hole via. A properly filled via will show the solder evenly extending from the top to the bottom of the barrel. This ensures a solid mechanical and electrical connection between the pin and the board.

In contrast, a poorly filled plated through-hole via might appear acceptable from the outside. But an X-ray view reveals gaps or voids in the barrel, indicating a weak or incomplete connection. These defects increase the risk of failure during the product’s lifecycle.

Through-Hole Vias Will Stay Relevant

Despite the rise of surface-mount technology, plated through-hole vias remain essential in many electronics manufacturing applications. Their mechanical strength and reliability make them the go-to solution for connectors and other components where durability is key. As long as these components are in use, manufacturers need to keep inspecting them to ensure quality and strength.

X-ray technology offers precision and reliability that optical inspections can’t match. Optical inspections can easily miss issues like incomplete fills, which can cause major failures. With X-ray inspection, manufacturers can guarantee that every plated through-hole via meets the required standards, ensuring reliability for both the manufacturer and the customer.


In conclusion, ensuring the quality of through-hole vias is critical to the success of your electronics manufacturing process. With Creative Electron’s cutting-edge X-ray systems, you can gain unparalleled visibility and precision in inspecting these key components. Whether you’re looking to improve efficiency, reduce defects, or elevate the overall quality of your products, our X-ray technology offers the ideal solution. Don’t leave your inspection process to chance—reach out to an x-ray expert at Creative Electron today and discover how our systems can revolutionize your through-hole via inspection. Let’s start optimizing your production process together!

Creative Electron X-Ray Systems

Explore Industrial X-Ray Inspection & CT Systems

Compare Creative Electron X-ray inspection systems for PCB and SMT inspection, medical devices, industrial quality control, 2D X-ray, planar CT, 3D CT, automated inspection, AI analysis, and X-ray component counting.

TruView Novus high-resolution 2D and 3D X-ray inspection system
High-Resolution 2D & 3D X-Ray

TruView™ Novus

High-resolution offline X-ray inspection with 2D, 2.5D, and 3D imaging for semiconductors, electronics, batteries, automotive components, and precision failure analysis.

Explore TruView™ Novus
TruCount X-ray parts counter and electronic component counting system
X-Ray Component Counting

TruCount™

AI-powered X-ray parts counter for fast electronic component counting on tape and reel with automated inventory tracking and MES, ERP, and WMS integration.

Explore TruCount™
SMART CT 3D computed tomography reconstruction of an electronic connector
Planar & 3D Computed Tomography

SMART CT™

Modular industrial computed tomography for planar CT and rotational 3D CT inspection, reconstruction, defect detection, failure analysis, and internal geometry evaluation.

Explore SMART CT™

Want to learn more?

Contact the X-ray People!

Contact Us
Intended Use

All information is confidential.

X-Ray University

Learn more from The X-Ray People!

Search our knowledge base or browse topics from the engineers and X-ray experts at Creative Electron.

Search X-Ray University